Offer details
Descrição
HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models as well as 1 RU and 2 RU form factor configurations, HP 5800 switches are built on open standards and include an open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network edge of enterprise campus networks.
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located at a remote device
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit (612 per stack)
Performance
• Hardware-based wire-speed access control lists (ACLs): helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
Resiliency and high availability
• Data center–optimized design: the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
• Full-featured console: provides complete control of the switch with a familiar CLI
Layer 2 switching
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located at a remote device
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit (612 per stack)
Performance
• Hardware-based wire-speed access control lists (ACLs): helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
Resiliency and high availability
• Data center–optimized design: the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
• Full-featured console: provides complete control of the switch with a familiar CLI
Layer 2 switching
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
Especificações
Funcionalidades de gestão | |
---|---|
Camada de switches | L3 |
Conectividade | |
Número de portas ethernet Basic switching RJ-45 | 24 |
Quantidade de slots SFP/SFP+ | 4 |
Quantidade de ranhuras de módulos SFP+ | 4 |
Conetor de alimentação | Tomada de entrada DC |
Tecnologia de cablagem ethernet de cobre | 1000BASE-T, 100BASE-T, 100BASE-TX, 10BASE-T |
Rede | |
Normas de Comunicações | IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u |
Full duplex | Sim |
Tecnologia de cablagem ethernet de cobre | 1000BASE-T, 100BASE-T, 100BASE-TX, 10BASE-T |
Roteamento de IP | Sim |
Suporte Flow control | Sim |
Controlo de tempestade de difusão | Sim |
Auto MDI/MDI-X | Sim |
Suporte 10G | Sim |
Transmissão de dados | |
Tabela de endereços MAC | 32000 entradas |
Velocidade de transmissão de dados | 10/100/1000 Mbps |
Capacidade de routing/switching | 208 Gbit/s |
Produtividade | 155 mpps |
Memória de pacote armazenada | 4 MB |
Segurança | |
Funcionalidades DHCP | DHCP server, DHCP client |
Protocolos | |
Protocolos de gestão | IMC, SNMP, Telnet, HTTPS, RMON1, FTP |
Design | |
Montagem em prateleira | Sim |
Empilhável | Não |
Cor do produto | Preto |
Forma | 1U |
Indicadores LED | Sim |
Segurança | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance |
Compatibilidade eletromagnética | VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A |
Certificação | RoHs |
Desempenho | |
Nível de ruído | 52,9 dB |
Tipo de memória | SDRAM |
Capacidade de memória interna | 512 MB |
Tamanho da memória flash | 512 MB |
Empilhável | Não |
Memória de pacote armazenada | 4 MB |
Gestão de energia | |
Voltagem da entrada | 100 - 240 V |
Consumo de energia (típico) | 15,4 W |
Fonte de alimentação | AC |
Conetor de alimentação | Tomada de entrada DC |
PoE | |
Power over Ethernet (PoE) | Sim |
Outras características | |
Latência | 4.02 µs |
Dimensões (CxLxA) | 467 x 440 x 43,6 mm |
Wi-Fi | Sim |
LED de indicação de energia | Sim |
Interface de rede | Gigabit Ethernet |
Frequência | 50 / 60 Hz |
Slot de expansão | 4x SFP + 1 Exp sl |
Peso (imperial) | 6 kg (13.2 lbs) |
Dimensões (C x L x A) (imperial) | 364,5 x 439,9 x 43,7 mm (14.3 x 17.3 x 1.72") |
Voltagem da entrada | 100 - 240 V |
Condições ambientais | |
Temperatura de funcionamento (T-T) | 0 - 45 °C |
Humidade relativa de funcionamento (H-H) | 10 - 90% |
Dissipação de calor | 358 BTU/h |
Pesos e dimensões | |
Peso | 6 kg |
Aprovação regulamentar | |
Certificação | RoHs |