Offer details
Produtos relacionados
Descrição
The HP 5120 EI Switch Series is comprised of Gigabit Ethernet switches that support static Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide up to four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High scalability provides investment protection with two expansion slots, each of which can support two-port 10GbE expansion modules. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
• Friendly port names: allows assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
Resiliency and high availability
• Separate data and control paths: separates control from services and keeps service processing isolated; increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
• Friendly port names: allows assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
Resiliency and high availability
• Separate data and control paths: separates control from services and keeps service processing isolated; increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Especificações
Conectividade | |
---|---|
Tecnologia de cablagem ethernet de cobre | 1000BASE-T, 100BASE-TX, 10BASE-T |
Número de portas ethernet Basic switching RJ-45 | 48 |
Número de portas Combo SFP | 4 |
Quantidade de slots SFP/SFP+ | 4 |
Quantidade de portas Gigabit Ethernet (cobre) | 48 |
Desempenho | |
Memória de pacote armazenada | 4 MB |
Tipo de memória | SDRAM |
Capacidade de memória interna | 128 MB |
Tamanho da memória flash | 16 MB |
Rede | |
Normas de Comunicações | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
Full duplex | Sim |
Tecnologia de cablagem ethernet de cobre | 1000BASE-T, 100BASE-TX, 10BASE-T |
Entradas de roteamento | 32 |
Transmissão de dados | |
Tabela de endereços MAC | 16000 entradas |
Velocidade de transmissão de dados | 10/100/1000 Mbps |
Capacidade de routing/switching | 192 Gbit/s |
Produtividade | 142 Mpps |
Velocidade máxima de transferência de dados | 1 Gbit/s |
Memória de pacote armazenada | 4 MB |
Design | |
Montagem em prateleira | Sim |
Cor do produto | Preto |
Segurança | UL 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1 |
Certificação | FCC, RoHS |
Gestão de energia | |
Voltagem de entrada AC | 100 - 240 V |
Frequência de entrada AC | 50 - 60 Hz |
Consumo de energia (típico) | 145 W |
PoE | |
Power over Ethernet (PoE) | Não |
Condições ambientais | |
Temperatura de funcionamento (T-T) | 0 - 45 °C |
Humidade de não funcionamento | 10 - 90% |
Dissipação de calor | 495 BTU/h |
Pesos e dimensões | |
Largura | 440 mm |
Profundidade | 300 mm |
Altura | 43,6 mm |
Peso | 5 kg |
Outras características | |
Latência | 3.2 µs |
Dimensões (CxLxA) | 440 x 300 x 43,6 mm |